Back to Chartering & Shipbroking

    Charter Party Clauses: A Complete Guide

    July 16, 2026·Chartering·Zea notes Editorial
    Zea notes Editorial

    Zea notes Editorial

    Maritime Professional

    Understanding the building blocks of every shipping contract

    If you work in chartering, broking, or ship operations, you will spend a large part of your working life inside a single document: the charter party. Freight is negotiated in a phone call or a few lines on a chat app, but the moment fixture terms are agreed, they get written down as a charter party  and everything that happens afterward, from laytime disputes to off-hire claims to who pays for a deviation, gets decided by reading its clauses. This note walks through what a charter party is, what a clause and subclause actually are, how the different clause types are built, and  most importantly  how to read and interpret them the way a broker, operator, or claims handler needs to.

    What Is a Charter Party?

    A charter party (often abbreviated C/P) is the contract between a shipowner (or disponent owner) and a charterer for the use of a vessel. The odd name comes from the Latin carta partita  a "divided document"  referring to the old practice of writing the agreement on a single sheet and tearing it in two, so each party held a matching half as proof of the contract.

    There are three broad families of charter party, and the structure of clauses differs depending on which one you're dealing with:

    • Voyage charter - the owner carries a specific cargo between named ports for a lump sum or a rate per tonne (e.g. Gencon, Asbatankvoy). The owner retains operational control of the vessel and bears voyage costs like bunkers and port charges.
    • Time charter - the charterer hires the vessel for a period of time (e.g. Nype, Baltime) and directs where it trades, but the owner still mans and maintains the ship. The charterer pays hire and covers voyage expenses like bunkers and port costs during the period.
    • Bareboat / demise charter - the charterer takes over the vessel almost as if they owned it, providing crew and taking on nearly all operational responsibility, paying only a hire for the vessel itself (e.g. Barecon).

    Most charter parties in practice are built on a standard proforma (Gencon, Nype, Asbatankvoy, Shellvoy, Barecon, and dozens of trade-specific forms published by BIMCO, the Baltic and International Maritime Council, or by industry bodies like Intertanko) with a set of rider clauses typed or attached to adapt the boilerplate to the specific fixture. Almost no real-world charter party is used purely "as printed" - the proforma gives you a skeleton, and the negotiated clauses give it a voice.

    What Is a Clause?

    A clause is a single, self-contained provision of the contract that deals with one particular right, obligation, or procedure. Charter parties are broken into numbered clauses precisely so that each rule can be referred to, negotiated, amended, or disputed individually, without having to redraft the whole document.

    Broadly, clauses in a charter party fall into a few functional categories:

    • Descriptive clauses - identify the parties, the vessel, and her particulars (Clause 1 in Gencon, for example, names the shipowner, the vessel, her flag, class, deadweight, and current position).
    • Performance clauses - set out what each side must actually do: loading and discharging obligations, laytime and demurrage, seaworthiness, deviation, and so on.
    • Payment clauses - freight or hire, payment terms, lien, cesser.
    • Risk-allocation clauses - exceptions, force majeure, war risks, ice clauses, general average - these decide who bears the cost when something goes wrong that isn't strictly either party's fault.
    • Dispute-resolution clauses - law and arbitration, jurisdiction.
    • Boilerplate / incorporation clauses - clauses that pull in external regimes wholesale, such as the Paramount Clause (incorporating the Hague or Hague-Visby Rules) or the ISM/ISPS clauses.

    Each clause is normally numbered (Clause 1, Clause 2, Clause 3…) so that email correspondence, addenda, and later disputes can all point to "Clause 9" or "Clause 17" without ambiguity.

    What Is a Subclause?

    A subclause is a further subdivision within a clause - used when a single topic has multiple distinct rules, conditions, or exceptions that each deserve their own reference point. Subclauses are typically marked with letters or lowercase roman numerals: (a), (b), (c) or (i), (ii), (iii), sometimes nested further into (a)(i), (a)(ii).

    Take a laytime/demurrage clause as an example. The parent clause might set the overall rule that laytime is to commence at a stated time after Notice of Readiness. Within it:

    • Subclause (a) might define when laytime commences.
    • Subclause (b) might list exceptions - Sundays, holidays, weather working days.
    • Subclause (c) might set the demurrage rate and how it's calculated.
    • Subclause (d) might address despatch.

    This layered structure matters enormously in practice. A dispute rarely turns on "the laytime clause" as a whole - it turns on whether a specific fact pattern falls inside subclause (b)'s exceptions or not. Knowing how to point precisely to "Clause 6(b)" rather than vaguely to "the laytime clause" is the difference between a claim that's easy to argue and one that invites a counter-argument on a technicality.

    Standard Clauses vs. Rider Clauses vs. Additional Clauses

    It helps to keep three categories distinct, because they interact differently during negotiation:

    1. Standard (printed) clauses - the pre-printed body of the proforma form (e.g. Gencon 1994's printed Clauses 1–19). These represent decades of industry-tested drafting and case law interpreting them.
    2. Rider clauses - additional clauses typed up and attached (usually as "Clause 20 onwards"), negotiated specifically for the fixture. These often deal with things the standard form doesn't cover in enough detail for a particular trade, cargo, or route - bunker clauses, ISPS/ISM clauses, cargo-specific clauses, off-hire events in a time charter, additional war risk clauses, etc.
    3. Amendments to printed clauses - where the parties don't add a new clause but instead strike out or vary the wording of an existing printed clause. This is common and is usually flagged in the recap or fixture note as "Clause 9 amended to read…" or "Clause 9 deleted and replaced by rider clause X."

    A well-drafted rider clause should always state clearly whether it is additional to, or in amendment/substitution of, a printed clause - leaving that ambiguous is one of the most common sources of later disputes.

    How Clauses Are Actually Negotiated

    In practice, chartering negotiations move through a recap process: broker and charterer exchange offers referencing "main terms" (freight/hire, laycan, cargo, load/discharge ports) and then progressively work through "subs" - additional clauses and amendments - until a clean recap is reached, meaning all subjects are lifted and both parties have agreed the full set of terms. The recap itself often becomes the binding contract in practice (even before a full charter party document is formally signed), and its wording - including which standard clauses are incorporated "as per [named proforma]" and which are amended - is what governs if a dispute arises before the full C/P is executed.

    This is why careful clause drafting during the recap stage matters just as much as the printed form itself. A recap that says "otherwise as per Gencon 1994 plus BIMCO ISPS/ISM clauses" is importing an entire body of language by reference, and every one of those incorporated clauses becomes binding even though it isn't retyped in the recap.

    How to Interpret Charter Party Clauses

    Interpretation is where the real skill lies, because charter party clauses are dense, often written in dated legal English, and frequently ambiguous when applied to a real fact pattern the drafters didn't anticipate. Some working principles:

    1. Read the clause as a whole, not in isolation. A single sentence pulled out of context can read very differently from how it operates once you see the exceptions and provisos around it. Always read the full clause - band any subclauses - before drawing a conclusion, and check whether other clauses elsewhere in the C/P qualify or cross-reference it (e.g. a general exceptions clause may override or narrow a specific clause).

    2. Check what has been amended or deleted. Never interpret a printed clause in isolation from the rider clauses and recap. If Clause 9 has been amended by a rider clause, the rider governs. Always work from the final, consolidated text - not just the blank proforma.

    3. Give words their ordinary commercial meaning. English courts (and most maritime arbitration, since a large share of charter party disputes are arbitrated in London under English law) interpret commercial contracts by asking what a reasonable business person, with the relevant background knowledge, would have understood the words to mean - not by parsing them as if they were a statute. Trade custom and prior dealings between the parties can inform this.

    4. Specific wording overrides general wording. Where a general clause and a specific clause appear to conflict, the more specific provision addressing the exact situation usually prevails over the more general one (the principle of generalia specialibus non derogant).

    5. Typed and handwritten clauses prevail over printed ones. A long-standing rule of construction: where a rider clause (typed or negotiated specifically for this fixture) conflicts with a printed clause of the standard form, the typed/rider clause is taken to reflect the parties' actual intention more closely, and it prevails.

    6. Look at who bears the risk, and why. Many disputes are really about risk allocation - who pays if the vessel is delayed, who pays if cargo is damaged, who pays if a strike stops loading. Reading a clause with the question "which party was this clause designed to protect, and from what?" often resolves apparent ambiguity faster than a purely literal reading.

    7. Understand what's incorporated by reference. Clauses like the Paramount Clause, Both-to-Blame Collision Clause, New Jason Clause, and general average clauses don't spell out their own rules - they import an entire external regime (the Hague-Visby Rules, York-Antwerp Rules, etc.). You cannot properly interpret the clause without going to the incorporated instrument itself.

    8. Case law and industry commentary matter. Because standard forms like Gencon, Nype, and Asbatankvoy have been used for decades, many of their clauses have been tested in arbitration and litigation. Reading how a clause has previously been interpreted by tribunals (widely reported in shipping law journals and BIMCO/industry commentary) is often more useful than pure textual analysis, since it tells you how the clause behaves in a real dispute rather than how it reads on paper.

    9. When in doubt, go back to the recap and the parties' conduct. If a clause is genuinely ambiguous, the recap correspondence, the parties' course of dealing, and how similar clauses have been performed in the past (both between these two parties and in the trade generally) are all legitimate aids to interpretation.

    Why This Matters Day to Day

    For a broker, precise clause drafting during negotiation avoids disputes later - vague language that seems fine in a fast-moving recap exchange often becomes the exact sentence an arbitrator has to dissect eighteen months later. For an operator, knowing exactly which clause and subclause governs a laytime calculation, an off-hire event, or a deviation decision is what turns a stressful voyage problem into a straightforward, defensible position. And for anyone new to chartering, developing the habit of reading a charter party clause by clause - checking amendments, cross-references, and incorporations before forming a view - is one of the fastest ways to build real commercial judgment in this trade.

    Charter parties reward careful readers. The clauses are the whole contract; nothing that matters happens outside them.

    Newsletter

    Maritime insights and articles delivered. Stay updated with the latest industry news and expert analysis.